The malt grinder is simple design, it has one pair of pull-wire roller, they will rotate correspondingly, the rotation speed of one roller is fixed, speed of the other is adjustable. To make sure the malt are well distributed on the whole rooler, the feeding capacity should be moderate and feeding speed is accordant.
In the roller-grinder, there is wedge or gasket between two rollers, there is adjusting bolt on the top of the wedge, it’s for adjusting the granual size of the grinded malt; when the adjusting bolt pull up the wedge, the wedge will push the roller separate from fixed wheel, the gap between two rollers will become bigger, granule size will become bigger; when the wedge is down, the roller gap will become smaller under the force of setting bolt spring. If use the gasket, the granule size can be adjusted by the quantity or thickness of gasket, the gap will become bigger with more gasket, while the gap will become smaller with fewer gasket, and granule size will becom smaller.
1、Grinder roller is horizontal type, seay for feeding product to grinding area, easy for disassembly;
2、Gear drive for quick and slow rollers, higher efficiency, stable running, lower noise;
3、Automatic center ball bearing for grinder roller to assure the concentric rotation, can bear high speed rotation and high pressure of the roller.
Office Add: NO.1377, Huhang Road, Fengxian District，Shanghai，China
TEL: +86 021 5743 3777 Fax: +86 021 5743 2999